To Next PageTo Next PageWhy is my laundry too hot after using Maytag Dryer?
If your laundry is too hot after using your Maytag dryer, allow the dryer to complete the cool down portion of the cycle before removing the load. Also, avoid using the Timed Dry cycle with a high temperature setting; instead, select a Sensor Cycle with a lower heat setting.
Why does my Maytag YMEDB755DW1 make a humming noise during the Steam cycle?
The humming or whining noise during the Steam cycle on your Maytag dryer is likely due to the water inlet valve running. If the dryer is newly installed or hasn't been used for a while, the water pump may be louder and run longer, which is normal.
Why didn't steam activate during Wrinkle Prevent on my Maytag YMEDB755DW1 Dryer?
Wrinkle Prevent does not enable Steam on all cycle/option combinations. Refer to the Cycle Guide to verify which cycles and settings enable Steam.
What does “PF” mean on my Maytag YMEDB755DW1 Dryer display?
The “PF” error message on your Maytag dryer display indicates that the drying cycle has been interrupted by a power failure. Touch the START key to clear the message, then press and hold the START key to resume the cycle.
General
