5. USING THE POOL CLEANER
The Pool Cleaner is very easy to use. Just follow the simple steps to get started, and your Pool Cleaner
is ready to go.
5.1 Setup
Position the power supply so that it is
approximately in the middle of the long
side of the pool at a distance of 3m/10ft.
Plug in the power supply and leave it in the
OFF position.
Unwind the cable and stretch it out
completely so that it has no kinks.
Attach the floating cable to the power supply
by inserting it with the notch on the connector (1)
lined up with the groove in the socket on the
power supply and turning clockwise (2).
3m/10ft
Before using the Pool Cleaner for the first time perform the following steps:
1
2
To Next Page
Loading...
