2-31
Essential Safety Equipment
Child Restraint
Form No. 8Q36-EA-01F
▼
Child-Restraint System
Installation Procedure (Rear
Outboard Seats)
1. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer’s instruction.
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer’s instructions
when installing tethers.
NOTE
The markings above the LATCH
lower anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
For rear
right seat
For rear left seat
LATCH
lower anchor
Marking
Sedan
For rear right seat
For rear left seat
Cover
Open
Tether strap
To Next Page
Loading...
