Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box Description
EEC MAIN
ISO
— EEC relay
FUEL PUMP
ISO
— Fuel pump relay
MAIN FAN
ISO
— Low-speed fan control relay (2.0L engine)
High-speed fan control relay 1 (3.0L
engine)
ADD FAN
ISO
— High-speed fan control relay 1 (2.0L
engine)
Low-speed fan control relay (3.0L engine)
DEF RELAY
ISO
— Rear defroster relay
ST RELAY
ISO
— Starter relay
ADD FAN 2
ISO
— High-speed fan control relay 2 (3.0L
engine)
Medium-speed fan control relay (2.0L
engine)
FOG RELAY
MICRO
— Foglamp relay
A/C RELAY
MICRO
— A/C clutch relay
OVERHEATING
If the temperature gauge indicates overheating and you experience
power loss, you hear a loud knocking or pinging noise, the engine is
probably too hot.
If this happens:
1. Drive safely to the side of the road and park off the right-of-way.
2. Shift the automatic transmission into P (Park) or the manual
transmission into the neutral position, and apply the parking brake.
3. Turn off the air conditioner.
Roadside Emergencies
162
To Next Page
Loading...
