Mazda 2014 CX-9 - Seats; Power Seat Operation and Memory

3
To Program the Driver’s Seat Position and Outside Mirror Angle
1 Parkthevehicle.
2 Adjusttheseattothedesiredpositionusingtheslide/tiltand
reclineswitches.
3 Adjusttheoutsidemirrorangles.
4 PushthememoryseatSETbuttonfollowedbyoneoftheprogramming
buttons(1-3)untilabeepisheard.Programmingisnowcomplete.
Programtheremainingtwobuttonsasdesired.
To Program the Driver’s Seat Position and Outside Mirror Angle
with Advanced key/Retractable type key
1 Adjusttheseatandoutsidemirrorangletothedesiredpositions.
2 Switchtheignitionoff.
3 PushtheSETbuttonnexttotheprogrammingbuttonsandthenthe
unlockbuttonontheadvancedkey/retractabletypekeyyouwantto
programwithinabout5seconds.Abeepsoundisheardwhenthe
operationiscompleted.
NOTE:
Whenthedriver'sdoorisunlockedusingaprogrammedadvancedkey/
retractabletypekey,theseatandoutsidemirrorangleswillmovetotheirprogrammed
positionsifthedriver'sdoorisopenedwithinabout40seconds.Abeepsoundis
heardaftertheadjustmenttotheprogrammedpositionsiscompleted.
To Move the Seat and Outside Mirrors to a Programmed Position
1 ShifttheselectorlevertothePposition.
2 Pushtheprogrammingbutton(1-3)thatyouselectedwhen
programmingyourseatposition.
Seats
ELECTRONICALLY OPERATED SEAT WITH MEMORY
Slide/Tilt Switch
Seatcanbemovedback
andforth,raised,lowered,
ortiltedwiththiscontrol.
Lumbar Switch
Pushforwardorbackwardtoincreaseor
decreaselumbarsupport.
Recline Switch
Pushforwardorbackward
toadjustseatbackangle.
Memory Seat Switch
1406031_14a_Mazda_CX-9_SSG_071013.indd 3 7/10/13 9:02 AM