1. Check under the hoo d area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the hood, grasp the padded area on
the stay, and secure the stay in the clip.
Verify that the support rod is secured in
the clip before closing the hood.
Clip
Clip
Clip
3. Lower the hood slowly until it rests in
the unlocked position, and then remove
your hands. Push the front center edge
of the hood downward until a latching
sound is heard, and the hood closes
completely.
3-46
Knowing Your Mazda
Doors and Locks
Mazda6_8BG7-EC-10H_Edition1 Page118
Monday, August 2 2010 1:26 PM
Form No.8BG7-EC-10H
To Next Page
Loading...
