Mazda 6 2011 - Page 286

(If the SIRIUS ID (ESN) for the tuner
does not display)
If “ESN Fail” is displayed, contact an
Authorized Mazda Dealer.
Parental lock
Parental lock, parental unlock, parental
lock ID change, and parental lock ID reset
can be set.
NOTE
l
Press the return button ( ) during
all the settings to return to the previous
display.
l
Turn the manual tuning dial during the ID
code or master code input to select “CLR”,
and then press the enter button (
)to
delete an input number.
l
If there is no input for ten seconds during
the ID code or master code input, the
system returns to the settings screen.
l
If only a four-digit ID code or master code
is input, “OK” can be selected.
l
If the registered ID code has been forgotten,
reset the code in “Parental-lock ID reset”
to [0000].
Parental lock
If a channel is locked, the channel is
muted.
(Channel locking)
1. Turn the manual tuning dial to select
the desired channel.
(Registered ID code input preparation)
2. Press selection button 5 to display the
settings screen.
3. Press selection button 1 to display the
parental lock settings screen.
4. “Ente r Pin” and “----” are displayed,
and input of the registered ID code is
possible.
(Registered ID code input)
5. Turn the manual tuning dial to select a
number and press the enter button
(
) to input the number.
(Registered ID code input
confirmation)
6. After inputting the four digi ts, turn the
manual tuning dial and select “OK”,
and then press the enter button
(
) to confirm the four digits.
7. If the four digits match the registered
ID code, “Parental lock” appears and
mute is turned on.
If they do not match the registered ID
code, “Error” appears and then the
display returns to “----”.
Parental unlock
Channels locked using the parental lock
function can be unlocked.
(Channel unlocking)
1. Select a channel to be unlocked by
turning the manual tuning dial.
(Registered ID code input preparation)
2. Press selection button 5 to display the
settings screen.
3. Press selection button 2 to display the
parental unlock screen.
4. “Enter Pin” and “----” are displayed,
and input of the registered ID code is
possible.
(Registered ID code input)
5. Turn the manual tuning dial to select a
number and press the enter button
(
) to input the number.
6-62
Interior Comfort
Audio System
Mazda6_8BG7-EC-10H_Edition1 Page286
Monday, August 2 2010 1:28 PM
Form No.8BG7-EC-10H