Mazda 6 2011 - Page 315

Programming a Bluetooth audio device
which has a PIN code (four digits)
1. Press selection button 2 to display the
Bluetooth audio setting menu screen.
2. Press selection button 2 again to
display the pairing program screen.
3. “Ente r Pin:0000” and
“Rotate/Press TUNE dial to change
code. Select “OK ” when complete.” are
displayed for input of the PIN code.
4. Turn the manual tuning dial to select
the specified number for the Bluetooth
audio device and press the enter button
(
) to input the number.
NOTE
Some devices accept only a particular pairing
code (Usually, “0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
5. After inputting the four digits, turn the
manual tuning dial and select “OK”,
and then press the enter button
(
) to set the four digits and
display
“Pairing is in progress. Please start
pairing procedure on your Bluetooth
device. Use the PIN “xxxx”.”.
NOTE
Press the return button ( ) to return
to the pairing program screen.
6. Operate the Bluetooth audio device and
set it to the program mode while
“Pairing is in progress. Please start
pairing procedure on your Bluetooth
device. Use the PIN “xxxx”.” is
displayed.
7. When the pairing programming is
completed, a “
” symbol and
“Pairing complete” are displayed, and
then the display returns to the normal
display.
If an error occurs during program
pairing, “Error” is displayed and the
display returns to the pairing program
screen.
NOTE
Some Bluetooth audio devices need a certain
amount of time before the “
” symbol is
displayed.
Programming a Bluetooth audio device
which does not have a PIN code (four
digits)
1. Press selection button 2 to display the
Bluetooth audio setting menu screen.
2. Press selection button 2 again to
display the pairing program screen.
3. “Enter Pin:0000” and
“Rotate/Press TUNE dial to change
code. Select “OK” when complete.” are
displayed for input of the PIN code.
4. Turn the manual tuning dial and select
“OK”, and then press the enter button
(
) to set the four digits and
display
“Pairing is in progress. Please start
pairing procedure on your Bluetooth
device. Use the PIN “0000”.”.
NOTE
Press the return button ( ) to return
to the pairing program screen.
Interior Comfort
Bluetooth Audio (Type B)
6-91
Mazda6_8BG7-EC-10H_Edition1 Page315
Monday, August 2 2010 1:28 PM
Form No.8BG7-EC-10H