4. Turn the cover counterclockwise and
remove it.
5. Detach the electrical connector from
the bulb by pulling it to the rear.
6. Unhoo k the bulb retaining spring.
7. Swing the retaining spring out and
away to free the headlight bulb.
8. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
9. Replace the bulb.
10. Install the new bulb in the reverse
order of removal.
NOTE
l
To replace the bulb, contact an Authorized
Mazda Dealer.
l
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
l
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
Fog light bulbs
í
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Turn the screws and the center section
of counterclockwise and remove them,
then partially peel back the mudgu ard.
Maintenance and Care
Owner Maintenance
8-41
í
Some models.
Mazda6_8BG7-EC-10H_Edition1 Page441
Monday, August 2 2010 1:29 PM
Form No.8BG7-EC-10H
To Next Page
Loading...
