Bulletin No: 09-036/14
© 2014 Mazda Motor of America, Inc.
Last Issued: 08/29/2014
Page 3 of 16
4. Install a new inner weather strip, and then slide it until it contacts the rear glass run channel.
5. Install a new front beltline molding. Refer to MS3 online or Workshop Manual (section 09-16 FRONT BELT-
LINE MOLDING REMOVAL/INSTALLATION).
6. Install a new front door trim. Refer to MS3 online or Workshop Manual (section 09-17 FRONT DOOR TRIM
REMOVAL/INSTALLATION).
7. Verify repair.
To Next Page
Loading...
