Accessory Sockets
The accessory socket is used as a
socket for accessories when the vehicle
power is switched to ACC or ON.
Only use accessories that have a
maximum power consumption of 120
W (DC12V10A) or below.
Warnings and Cautions
When Using the
Accessory Socket
CAUTION
Always close the cover when it is not
in use. If foreign matter or liquid
penetrates the socket, it may cause a
problem.
Insert the accessory plug into the
socket securely. If the plug is not
inserted securely, it may heat
excessively and blow the fuse.
Do not use accessories that have a
power consumption of over 120 W
(DC12V10A). Otherwise, it could
cause a malfunction.
Noise may occur on the audio
playback depending on the device
connected to the accessory socket.
Do not insert the cigarette lighter
into the accessory socket.
Depending on the device connected
to the accessory socket, the vehicle's
electrical system might be affected,
which could cause the warning light
to turn on. Disconnect the
connected device and make sure
that the problem is resolved. If the
problem is resolved, switch the
vehicle power OFF after the device is
disconnected from the socket. If the
problem is not resolved, consult an
Authorized Mazda Dealer.
Other Equipment
Accessory Sockets
7-37
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43
To Next Page
Loading...
Need help?
General
