5555
■
When Sending One Destination
1.
Display the detailed information for the destination that was
searched.
2.
Touch SEND TO CAR .
3.
The destination is automatically received by the vehicle.
• If a Navigation Route Has Not Been Created by the Vehicle
When setting the route using the received destination, select
[Create] and edit the navigation route.
• If a Navigation Route Setting by the Vehicle Has Been Completed
Select whether the received destination is to be set as a new destination or to be added
to the existing route.
To discard the existing route and set a new route, select
[Replace]
.
To add to the existing route, select
[Add]
and edit the navigation route for each
destination.
When adding a destination to an existing
navigation route, select a position to insert as
shown in the figure.
Add (2), (3) as transit points with (1) as the
final destination.
&XUUHQW
ORFDWLRQ
([LVWLQJQDYLJDWLRQSDWKZD\
'HVWLQDWLRQ$'HVWLQDWLRQ%
ࣉ࣊࣋
3RVLWLRQWRLQVHUWGHVWLQDWLRQ䈲6HQGWR&DU䈳
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
