Black plate (244,1)
qClock
Display
Minute set button
Hour set button
Clock button
Audio control dial
Setting the time
The clock can be set at any time when the
ignition is switched to ACC or ON.
1. To adjust the time, press the clock
button (
) for about 2 seconds
until a beep is heard.
The clock's current time will flash.
2. To advance the hours, press the hour
set button (
). To advance the
minutes, press the minute set button
(
) while the time is flashing.
3. Press the clock button (
) again
to start the clock.
NOTE
l
When the clock button ( )is
released, the seconds are reset to “00”.
l
If the power supply to the unit is interrupted
(if the fuse blows or the vehicle's battery is
disconnected), the clock will need to be
reset.
6-30
Interior Comfort
Audio System
MX-5_8DG7-EC-13F_Edition2 Page244
Tuesday, September 24 2013 10:12 AM
Form No.8DG7-EC-13F
To Next Page
Loading...
