Mazda PZ170-04021 - Page 19

19
When the vehicle inadvertently moves…
z If the vehicle engine is started with the remote control, it will stop the
engine.
z Restart the engine with the push start switch.
● Other Engine Stop Conditions
The engine will stop if one of the following conditions is true.
1) The hood is opened.
2) The shift lever is put in a position other than the “P” position.
3) A door is opened.
4) The push start switch is pressed.
5) The pre-set warm up time has elapsed.
6) The brake pedal is engaged.
7) The accelerator pedal is engaged (the engine stops if the rpm is over 4,000).
8
)
There is an advanced ke
y
or smart ke
y
inside the vehicle.
If the engine is started with the push start switch, it cannot be stopped with the
remote control.
Note