10
11) WARNINGS REGARDING SAFETY
This electrical appliance must be used in conformity with the rules in force gover-
ning safe operation.
•
WHEN OPERATING THE APPLIANCE,BEWARE OF THE MOVING MECHA-
NICAL PARTS’ IN THE AREA OF THE GRINDING BLADES AND OF THE
GROUND COFFEE OUTLET.
BEFORE REMOVING THE HOPPER FROM THE GRINDING SYS T E M ,
DISCONNECT THE POWER SUPPLY.
AVOID REMOVING FOREIGN BODIES FROM THE GRINDING SYSTEM OR
HOPPER WITHOUT FIRST UNPLUGGING THE APPLIANCE FROM THE
MAINS.
•
Take care, as the grinding blades may continue rotating for a short while even
after the appliance is switched off.
•
In the event the appliance is not working properly or is faulty, contact skilled
technical personnel, and do not attempt to make repairs yourself.
•
Do not tamper with the appliance.
•
BEFORE PERFORMING ANY WORK ON THE APPLIANCE, INCLUDING
CLEANING AND/OR MAINTENANCE, DISCONNECT IT FROM T H E
POWER SUPPLY BY UNPLUGGING.
TURNING OFF THE APPLIANCE USING ITS MASTER SWITCH DOES NOT
ASSURE THE SAME CONDITIONS OF SAFETY.
•
Do not touch the appliance with damp or wet hands or feet.
•
Do not use the appliance barefoot.
•
Do not tug on the supply cable to unplug the appliance from the mains.
•
Do not let liquids of any kind come into contact with the internal or external
parts of the appliance.
•
Never put ground coffee in the hopper intended only for coffee beans.
•
When the appliance is left unattended, the appliance’s power supply must be
disconnected using its master switch (for example,at night,during work breaks,
midweek closing or holidays).
•
THE USER IS NOT AUTHORIZED TO REMOVE SCREWS OR ANY PARTS
SCREWED ONTOTHE APPLIANCE.
The manufacturer cannot be held responsible for bodily injury or damage to pro-
perty if these regulations are not complied with.
inglese 23-07-2001 13:16 Page 10
To Next Page
Loading...
