Operating Manual
Operation instructions Page15-3
Type: .......................... Special gloves made of broom-butyl for Glove Box Systems.
Design: ...................... Various diameters, sizes and shapes.
15
．3 Replacing gloves
The Gloves are secured by two O-rings.
To remove the gloves remove the O-rings and
removes the glove as shown
Note：
MBRAUN recommends that the gloves be replaced at regular intervals. The
gloves must be changed upon signs of wear and tear that may or have caused
Before changing gloves ensure that, the glove box is atmosphere is safe to
breathe. If necessary, purge and fill the glove box with ambient air before
attempting to change gloves
To Next Page
Loading...
