Operating Manual
Operation instructions Page15-4
To replace the glove -
place the glove over the port so that the rim of the glove locates in the port’s
innermost groove
(the outer 2 grooves are for locating the O-rings that secure the glove).
Note：
Ensure that the correct type of glove
Check that the glove is orientated
correctly
and replace with new O-rings.
\
15
．4 Glove port covers
Glove Port Covers
MBRAUN glove port covers are available as an option. The glove port covers are for
Notice
After the changing of gloves, the glove box atmosphere will require purging to
remove any undesired oxygen and/or moisture. (see chapter on Purging the
System)
To Next Page
