29
Inserting / Replacing the Transmitter Batteries
Microphone
• Switch of the microphone off (push switch downwards).
• Screw off the casing bottom of the microphone
• If necessary, remove the discharged battery from the battery holder.
• Insert three new 1.5 V mignon batteries (AA) in the battery compartment paying attention to the polarity. The
correct polarity is stated in the battery compartment.
• Screw the casing bottom back onto the microphone
• If the batteries are discharged, the operating display at the microphone flashes. In this case, replace the batteries
as described above.
To Next Page