The FL-1000 is a smart control device designed to monitor water temperature and detect leaks and freezing conditions in a water pipe system. It integrates with a home's Wi-Fi network, allowing users to monitor and control the device remotely via a user interface or a dedicated mobile application.
Function Description:
The primary function of the FL-1000 is to act as a leak and freeze sensor for water pipes. It continuously monitors the water temperature within the pipe. If the temperature drops below a user-defined "Freeze Set Point," it triggers a freeze alarm. Similarly, if a leak is detected, it triggers a leak alarm. Upon activation of either alarm, the device is configured to send notifications, such as emails or text messages, to the user.
The device operates in an auto mode, where it tests for leaks within a user-defined time window ("Start Time" to "End Time"). There is also a manual "Test" button that allows users to initiate a leak test within 10 seconds.
Important Technical Specifications:
- Power Supply: The FL-1000 operates with a 24 VDC power adapter.
- Connectivity: It supports Wi-Fi connectivity, allowing it to connect to a local Wi-Fi network or function as its own Wi-Fi access point.
- IP Address (Default): When operating as its own Wi-Fi network, the default IP address is "192.168.4.1."
- Wi-Fi Network Name (SSID): When functioning as an access point, the device's Wi-Fi network name will be "FL-1000_xxxxxx," where "xxxxxx" represents the last four characters of the device's MAC address.
- Default Password: The default password for connecting to the FL-1000's Wi-Fi network is "FL-1000."
- Sensor Type: The device includes a leak/freeze sensor that is installed directly into the water pipe.
- Installation Requirements: Requires a 1/2 inch brass adapter (not included) for installation into a PEX water pipe. The installation location should be at least 6 inches after the main shutoff valve and before any pipe branches.
Usage Features:
- User Interface (UI): The FL-1000 features a web-based user interface accessible via a smart device (phone, tablet, or computer) connected to its Wi-Fi network or the local home Wi-Fi network. The UI displays real-time water temperature, the set freeze point, and the status of leak and freeze alarms.
- Configuration Options:
- Freeze Set Point: Users can set a specific water temperature threshold. If the water temperature falls below this point, a freeze alarm is triggered.
- Leak Alarm Status: Indicates whether a leak has been detected.
- Freeze Alarm Status: Indicates whether a freezing condition has been detected.
- Test Button: Allows for manual testing of leak detection within 10 seconds.
- Start Time/End Time: Defines a time window during which the FL-1000 automatically tests for leaks.
- Reset Alarms: A button to clear active alarms.
- Communications Configuration Page: Accessible via the "Configure" button, this page allows users to set up Wi-Fi connectivity, including connecting to an existing home Wi-Fi network or configuring the device's own Wi-Fi access point parameters (SSID, password, IP address, etc.).
- Mobile Application (APP): A dedicated mobile application is available for free download. This app allows users to access the controller locally via the FL-1000's user interface access point or globally over the internet, providing remote monitoring and control capabilities.
- Alarm Notifications: The device is designed to send email and/or text messages when a leak or freeze alarm is triggered.
- Wi-Fi Connection Options:
- Direct Connection: Users can connect directly to the FL-1000's onboard Wi-Fi network within 50 feet of the unit.
- Local Wi-Fi Network Connection: The device can be configured to connect to the user's existing home Wi-Fi network, allowing for broader access and integration into a smart home ecosystem.
Maintenance Features:
- Troubleshooting Guide: A flowchart is provided to assist users in diagnosing common issues, particularly related to Wi-Fi connectivity. This includes steps for checking if the FL-1000 network is visible, connecting to it, and accessing the user interface.
- Reboot Functionality: The troubleshooting guide suggests rebooting the FL-1000 as a step to resolve connectivity issues.
- Error Indicators: The troubleshooting guide helps identify potential hardware or firmware defects if the Wi-Fi network does not appear or if the user interface cannot be accessed. In such cases, it advises sending the controller back for service.
- Warranty: The product comes with a three-year warranty from Mani Group, covering defects in material and workmanship. The warranty commences on the date the product is shipped. Mani Group's responsibility is limited to repairing or replacing defective products. The warranty does not cover defects caused by negligence, misuse, mistreatment, or alterations to the product.
Need help?
General
To Next Page