EasyManua.ls Logo

McCulloch CS 35 - User Manual

McCulloch CS 35
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GB
Operator’s manual 6-27
SE
Bruksanvisning 28-49
DK
Brugsanvisning 50-71
FI
Käyttöohje 72-94
NO
Bruksanvisning 95-116
FR
Manuel d’utilisation 117-140
NL
Gebruiksaanwijzing 141--164
IT
Istruzioni per l’uso 165-187
DE
Bedienungsanweisung 188-211
ES
Manual de instrucciones 212-235
PT
Instruções para o uso 236-259
HU
Használati utasítás
260-281
PL
Instrukcja obs∏ugi
282-305
RU
ýêñïëóàòàöèè
504-531
EE
Käsitsemisõpetus
306-327
LV
Lieto‰anas pamÇc¥ba
328-349
LT
Naudojimosi instrukcijos
350-371
SK
Návod na obsluhu
372-393
HR
Priruãnik
394-415
BA
Uputstvo o upotrebi
416-437
RS
Priruãnik
438-459
SI
Navodila za uporabo
460-481
CZ
Návod k pouÏití
482-503
BG
åêñïëîàòàöèß
532-559
RO
Instrucöiuni de utilizare
586-607
GR
√‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
608-631
TR
Kullanım kılavuzu
632-653
UA
êîðèñòóâà÷à
560-585
CS 35
CS 35S

Questions and Answers

  • C
    Christopher KingJul 27, 2025
    How to fix a McCulloch CS 35 that won't start?
    • A
      Amber SullivanJul 28, 2025
      If your McCulloch Chainsaw engine won't start, several issues could be the cause. The starter pawls might be blocked; in this case, adjust or replace them. Also, make sure to clean around the pawls. Ensure that you are using the correct fuel type; if not, drain the fuel tank and fill it with the correct fuel. If the fuel tank is filled with chain oil, drain the fuel tank if you have not tried to start the product.
  • M
    Mark MartinezAug 5, 2025
    What to do if my McCulloch CS 35 has no spark?
    • J
      Jacob MurphyAug 5, 2025
      If there's no spark in your McCulloch Chainsaw, start by ensuring the spark plug is dry and clean. If the electrode gap is incorrect, clean the spark plug and make sure the electrode gap and spark plug are correct. Tighten the spark plug if it is loose. If the engine is flooded due to repeated starts with full choke after ignition, remove and clean the spark plug, put the product on its side with the spark plug hole away from you, pull the starter rope handle 6-8 times, assemble the spark plug and start the product.
  • D
    David JacobsAug 16, 2025
    Why does my McCulloch Chainsaw engine start but stop again?
    • N
      Nicholas GrahamAug 16, 2025
      If your McCulloch Chainsaw engine starts and then stops, it could be due to several reasons. Ensure you're using the correct fuel type; if not, drain the tank and refill it with the appropriate fuel. Another potential cause is a clogged air filter, which requires cleaning or replacement. Also, check the fuel filter for clogs and replace it if necessary.

Summary

General Safety Precautions

Important safety information

Covers critical warnings, precautions, and general safety advice.

Personal protective equipment

Details mandatory safety gear for operating the chain saw.

Chain brake and front hand guard

Describes operation and function of the chain brake system.

Cutting equipment safety

Emphasizes safe use and maintenance of the chain and bar.

Chain sharpening and depth gauge

Details procedures for maintaining cutting teeth and depth gauges.

Chain tensioning

Explains the process for correctly tensioning the saw chain.

Lubrication and wear checks

Outlines routine checks for chain lubrication and component wear.

Fuel Handling and Safety

Fueling and safety

Covers safe procedures for refueling and handling fuel.

Starting and Stopping Procedures

Working Techniques

Tree felling techniques

Detailed instructions for safely felling trees.

Kickback avoidance and specific cuts

Covers critical safety aspects and cutting methods.

Maintenance Procedures

Safety equipment maintenance

Procedures for inspecting and maintaining safety features.

McCulloch CS 35 Specifications

General IconGeneral
BrandMcCulloch
ModelCS 35
CategoryChainsaw
LanguageEnglish

Related product manuals