McCulloch CS 35 - English; Table of Contents

CONTENTS
8 – English
Contents
INTRODUCTION
Symbols on the machine: ...................................... 5
INTRODUCTION
Dear Customer, ..................................................... 7
What is what on the chain saw? ........................... 7
CONTENTS
Contents ............................................................... 8
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 9
Important .............................................................. 9
Always use common sense .................................. 9
Personal protective equipment ............................. 10
Machine ′ s safety equipment ................................. 10
Cutting equipment ................................................. 12
ASSEMBLY
Fitting the bar and chain ....................................... 15
FUEL HANDLING
Fuel ....................................................................... 16
Fueling .................................................................. 17
Fuel safety ............................................................ 17
STARTING AND STOPPING
Starting and stopping ............................................ 18
WORKING TECHNIQUES
Before use: ............................................................ 19
General working instructions ................................ 19
How to avoid kickback ........................................... 22
MAINTENANCE
General ................................................................. 23
Carburettor adjustment ......................................... 23
Checking, maintaining and servicing chain saw
safety equipment .................................................. 23
Muffler ................................................................... 24
Air filter .................................................................. 24
Spark plug ............................................................. 24
Maintenance schedule .......................................... 25
TECHNICAL DATA
Technical data ....................................................... 26
Guide bar and saw chain combinations ................ 27
EC Declaration of Conformity ............................... 27