EasyManua.ls Logo

McCulloch MT 250 LK User Manual

McCulloch MT 250 LK
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
115488728 Rev. 2 9/21/12 BRW
Question and Answer IconNeed help?

Do you have a question about the McCulloch MT 250 LK and is the answer not in the manual?

McCulloch MT 250 LK Specifications

General IconGeneral
Engine Type2-stroke
Displacement25 cm³
Cutting Width43 cm
Shaft TypeStraight
Handle TypeLoop

Summary

IDENTIFICATION OF SYMBOLS

Safety and Warning Symbols

Identifies hazard, caution, and general safety symbols.

Personal Protective Equipment Symbols

Symbols indicating required PPE like eye and hearing protection.

Technical and Operational Symbols

Symbols for technical specs (speed, fuel) and operational controls (ON/STOP).

TECHNICAL DATA SHEET

Engine and Ignition Specifications

Details engine displacement, power, RPM, spark plug, and gap.

Fuel, Lubrication, Weight, and Noise Data

Covers fuel consumption, weight, and noise emission levels.

Sound and Vibration Level Measurements

Reports operator ear sound pressure and handle vibration levels.

IDENTIFICATION (WHAT IS WHAT?)

Machine Component Identification

Illustrates and labels all major parts of the trimmer unit.

SAFETY RULES

General Operation Safety Warnings

Key warnings for safe operation, including appliance hazards and accessories.

Operator Safety Guidelines

Rules for operator dress, alertness, and handling electromagnetic fields.

UNIT / MAINTENANCE SAFETY

Maintenance Safety Precautions

Safety steps before and during maintenance, handling hot parts.

FUEL SAFETY

Fuel Handling and Storage Safety

Safe practices for mixing, pouring, storing, and handling fuel and oil.

CUTTING SAFETY

Cutting Operation Safety Rules

Guidelines for safe cutting, including area inspection and user positioning.

TRANSPORTING AND STORAGE

Storage and Transport Procedures

Instructions for safely storing and transporting the unit, including fuel considerations.

Health Notice on Prolonged Vibration Exposure

Declaration of Conformity

TROUBLESHOOTING TABLE

Troubleshooting Common Issues

Table of common problems, their causes, and remedies for the unit.

ASSEMBLY

Shaft and Handle Assembly

Steps for assembling the shaft and adjusting the assist handle.

Shield Attachment Procedure

Instructions for securely attaching the protective shield to the unit.

OPERATION

Fueling and Stopping Procedures

Details on fueling the engine and how to stop the unit.

Starting Cold and Warm Engines

Step-by-step guide for starting cold and warm engines using controls.

Carburetor Idle Speed Adjustment

Guidance on adjusting the carburetor idle speed for optimal performance.

Storage Instructions

Procedures for storing the unit after use and for the off-season.

OPERATING INSTRUCTIONS

Operating Position and Controls

Proper stance, use of controls, and stopping procedures.

Trimmer Line Advance Mechanism

How to advance trimmer line and warnings about line types.

Engine Starting Procedures

Detailed steps for starting cold, warm, and flooded engines.

CUTTING METHODS

Cutting Techniques Explained

Illustrates and describes proper techniques for trimming, scalping, mowing, and sweeping.

MAINTENANCE

General Maintenance Checks and Cleaning

Checking parts, cleaning unit, and maintaining the air filter.

Spark Plug Replacement

Procedure for replacing the spark plug for optimal engine performance.

SERVICE AND ADJUSTMENTS

Replacing the Trimmer Line

Detailed steps for removing old line and installing new trimmer line.

Related product manuals