McCulloch MT 260 CLS User Manual

MT 260 CLS
GB Operator’s manualOriginal instructions
WWW.McCULLOCH.COM
Rev. 5 2013-1-17
576191711
Husqvarna AB
SE-561 82 Huskvarna
Sweden
WARNING: For your own safety please read
this manual before attempting to operate your new
unit.Failure to follow instructions can result in
serious personal injury.Spend a few moments to
familiarize yourself with your trimmer before each
use.

McCulloch MT 260 CLS Specifications

General

Brand	McCulloch
Model	MT 260 CLS
Category	Trimmer
Language	English

Summary

Original Instructions

GB Operator's Manual

Official operator's manual for the McCulloch MT 260 CLS in Great Britain.

General Safety Rules

Meaning of Symbols

Explanation of safety symbols marked on the product to ensure safe operation.

Safe Operating Procedures

Essential actions and precautions to follow for safe and effective use of the unit.

What Not to Do

Critical actions to avoid to prevent damage, injury, and voiding warranty.

General Identification and Assembly

Safety Features

Highlights key safety features to protect the operator during use.

Assembly Instructions

Step-by-step guide for assembling the unit, including handle and shield.

Fuel and Lubrication

Mixing Fuel

Instructions for correctly mixing fuel and oil for the 2-cycle engine.

Operating Instructions and Cutting Methods

Starting a Cold Engine

Procedure for starting a cold engine, including choke and primer use.

Warm Engine Start

Procedure for starting the engine when it is already warm.

To Stop Engine

How to safely stop the engine during operation.

Operating Position

Guidance on maintaining a safe and effective posture while operating.

Cutting Methods

Techniques for efficient cutting and line management.

Maintenance and Service

Trimming, Scalping, Mowing, Sweeping

Describes different cutting techniques and their specific requirements.

Maintenance Precautions

Important warnings and tips for performing maintenance safely.

Air Filter Maintenance

Instructions for cleaning and maintaining the air filter.

Fuel Cap and Fuel Filter

Procedures for handling the fuel cap and replacing the fuel filter.

Storing the Unit

Steps for properly storing the unit to prevent damage and ensure readiness.

Spark Plug Service

Information on spark plug gap setting and replacement.

Debris Shield Knife Sharpening

Guidance on how to sharpen the knife on the debris shield.

Trimmer Head and Troubleshooting

Replacing Trimmer Line

Step-by-step instructions for replacing the trimmer line.

Replacing the Trimmer Head

Procedure for removing and installing a new trimmer head.

Troubleshooting Engine Problems

Common engine issues and their corrective actions.

EC Declaration of Conformity