EasyManua.ls Logo

McGREGOR GY6000 - Page 8

McGREGOR GY6000
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important - Please read these instructions fully before starting assembly
8
Customer Helpline 0345 605 2063
Safety Information
Operational Safety (continued)
Make sure that the material inserted into the shredder
does not contain hard objects made of metal, stone,
glass or similar.
Do not use the shredder in the rain and in bad weather.
Work in daylight or under good lighting conditions.
Do not operate the shredder when you are tired
or distracted, or under the inuence of alcohol or
medication. Always take a break when you need one
and be sensible about how you work.
Switch the shredder off and pull the plug under the
following circumstances:
When you are not using the device, transporting it or
leaving it unattended. New Line. Capitalize B.
When you are checking the device, cleaning it or
removing blockages.
When you are carrying out cleaning or maintenance
work or replacing accessories.
Before moving or lifting the shredder.
If foreign objects should enter the shredder, if the
shredder is making unfamiliar noises or vibrations
(check the shredder for damage before starting it up
again)
Do not allow shredded material to accumulate near
the ejection area. This may otherwise hinder proper
ejection and force the material back up through the
feeder.
Do not transport or tip the shredder with the motor
running.
Keep hands, other body parts and clothing out of the
lling chamber and ejection channel and away from