Safety Information
Personal Safety (continued)
Operational Safety
order. Replace any damaged or illegible stickers.
• Only use replacement parts and accessories
supplied and recommended by the manufacturer.
Using thirdparty parts will immediately invalidate the
guarantee.
• Do not leave the shredder working unattended and
keep it in a dry place out of children’s reach.
• While being used in the open, connect the shredder to
a residual current (RC) circuit breaker with a trip current
of not more than 30 mA.
• When servicing the cutting means be aware that,
even though the power source will not start due to the
interlock feature of the guard, the cutting means can still
be moved by a manual starting mechanism.
• Shut-off the power unit before attaching or removing the box.
• Keep all guards and deectors in place and in good
working condition.
• Make sure that the funnel feeder is empty before you
start the shredder.
• Keep your head, hair and body away from the intake
opening.
• Do not reach into the funnel feeder during operation.
The shredder will continue to run for a short period
after you switch it off.
• Always make sure you are standing in a rm, balanced
position. Do not lean forwards, and never lean over the
shredder when inserting materials.
To Next Page
Loading...