Prepare
Customer Helpline 0345 605 2062
19
Loosen the quick release knob (G) and extend the upper part of the
handle to the desired handle length. Then tight the quick release knob to
fix the tube tight.
5 Adjust the telescopic head.
Hold the working head tightly. Push the working head adjusting button
(H) and then turn the cutter head to the desired position. Release the
adjusting button again and check whether the cutter head is locked in
place.
Note: The cutter head can be locked in six positions (-45°, -22.5°, 0°,
22.5°, 45°, 67.5°)
67.5°
45°
22.5°
-45°
-22.5°
0°
Adjust the telescopic handle
Adjust the telescopic head
H
To Next Page
Loading...
