Prepare
Customer Helpline 0345 605 2062
23
WARNING! Always release the On/Off switch before inserting or re-
moving the battery pack.
1. Remove the battery pack: Press the button on the end of the battery
pack, then remove the pack from the trimmer.
2. Install the battery pack: Align the ribs on both sides of the battery pack
with the slots in the housing, and slip it into place. Always insert it all the
way until it locks in place with a click sound.If it’s not correctly inserted, it
may accidentally fall out of the trimmer, causing injury to you or bystand-
ers.
3. To release the battery from the trimmer, push the button on the end of
the battery pack and pull away from the trimmer.
button
Remove the blade sheath
Install the battery pack
Remove the blade sheath
To Next Page
Loading...
