Customer Helpline 0345 605 2062
29
WARNING!
The sound values have been determined according to the noise test code given
in EN 60745-2-15, using the basic standards EN ISO 11094 and EN ISO 3744.
The sound intensity level for the operator may exceed 80dB(A) and ear
protection measures are necessary.
The declared vibration value (according to EN 60745-1) has been measured
in accordance with a standard test method, and may be used for comparing
one product with another. The declared vibration value may also be used in a
preliminary assessment of exposure.
Depending on the actual use of the product, the vibration values can dier from
the declared total. Adopt proper measures to protect yourself against vibration
exposures. Take the whole work process into consideration, including times the
product is running under no load or switched o.
WARNING! This tool may cause Hand-Arm Vibration Syndrome (HAVS) if its
use is not adequately managed.
Preventative measures include, among others, regular maintenance and care
of the product and cutting attachments, keeping hands warm and periodical
breaks, as well as proper planning of work processes.
Technical Data
To Next Page
Loading...
