Safety Information
Important - Please read these instructions fully before operating or maintaining
Customer Helpline 0345 605 2062
7
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD
with a tripping current of 30mA or less) protected
supply. Use of an RCD reduces the risk of elec-
tric shock.
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
• Use Personal Protective Equipment(PPE). Al-
ways wear eye protection. Protective equipment,
such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropri-
ate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to the
power source and/or battery pack, picking up or
Personal safety
To Next Page
Loading...
