Need help?Do you have a question about the McIntosh MAC7200 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Rated Power Band | 20Hz - 20kHz |
| Total Harmonic Distortion | 0.005% |
| Dynamic Headroom | 1.5 dB |
| Damping Factor | >40 |
| Preamplifier Inputs | 6 |
| Variable Outputs | 2 |
| Digital USB Input | 1 |
| Digital Coaxial Input | 2 |
| Digital Optical Input | 2 |
| Digital MCT Input | 1 |
| Tuner Section | AM/FM |
| HD Radio | Yes |
| Standby Power Consumption | 0.5 Watts |
| Power Output per Channel | 200 Watts |
| Speaker Impedance | 2, 4 or 8 Ohms |
| Input Sensitivity | 0.5 V |
Provides foundational details about the MAC7200 receiver and its operation.
Details the various input/output connectors and necessary cables for system integration.
Introduces the McIntosh MAC7200 Receiver and its esteemed audio standards.
Highlights key technological advancements and capabilities of the MAC7200.
Provides detailed physical measurements for placement and installation of the MAC7200.
Offers instructions and considerations for properly installing the MAC7200 in various environments.
Details the layout and purpose of all connections found on the rear panel of the MAC7200.
Guides users on how to connect various audio and control components to the MAC7200.
Explains how to integrate the MAC7200 into a multichannel audio system for signal pass-through.
Details how to use the MAC7200 with an additional amplifier for bi-amplifying loudspeakers.
Explains how to correctly connect speaker cables to the amplifier's output terminals.
Provides step-by-step instructions and guidelines for connecting loudspeakers to the MAC7200.
Details the functions of each push-button on the included HR085 remote control.
Offers guidance on operating the MAC7200 using the HR085 remote control.
Identifies and explains the purpose of all front panel elements of the MAC7200 receiver.
Guides users on how to access and navigate the MAC7200's setup menu for customization.
Customizing input names, switching inputs on/off, and configuring output behavior.
Managing power control triggers, data ports, and USB automute features.
Configuring tuner regions, presets, remote control codes, and IR sensor behavior.
Details for performing a factory reset and resetting the unit's microprocessors.
Instructions for powering the unit on/off and selecting audio sources.
How to adjust volume, balance, and tone controls (Bass/Treble) for desired sound.
Configuring Phono adjustments, Mono/Stereo mode, and headphone HXD.
Guides on tuning FM/AM stations, direct access, presets, and using tuner text features.
Step-by-step process for installing drivers and playing audio via USB connection.
Lists detailed technical specifications for the MAC7200's amplifier section.
Details the supported digital input signal formats, sample rates, and connector types.
Covers power requirements, overall dimensions, and weight of the MAC7200.
Provides guidance and a material list for safely repacking the MAC7200 for shipment.
To Next Page
