McIntosh MS500

13
How to use the Remote Control
The Remote Control is capable of performing most
Operating Functions for the MS500 Music Streamer.
Note: Refer to the “How to Operate” Section of this
manual for additional information using this
Remote Control.
Dual Function Push-buttons
The five push-buttons located at the top/front of the
Remote Control, in the circular molded area, are dual
function. When music is playing, the (+) Push-button
increases the volume level
1
and the (-) Push-button
decreases the volume level
1.
Push the : Push-button
for the next selection or push the 9 Push-button for
the previous selection.
During the time a MS500 Menu is being ac-
cessed, the push-buttons at the top/front of the Remote
Control provide the ability to navigate the menus and
select the desired choice or function. The (+) Push-but-
ton is used to move the cursor Up through the menu.
Likewise, the (-) Push-button is used to move Down.
The 9 Push-button is used to move to the Left, the :
Push-button is used to move to the Right and the ►
Push-button is used to Select the highlighted choice.
1
Adjusting the volume level using the Remote Con-
trol requires a change to the default setting located
in the Setup Mode, refer to pages 14 and 15 for ad-
ditional information.
How to use the Remote Control
SELECTS the cur-
rent menu item and
also starts playback
and pauses playback
Selects the previous
selection
Moves forward in time
through a selection
Momentarily
press to Power the
MS500 ON or OFF
Indicates when a
Remote Control
Command has been
sent
Selects the next
selection
Selects available
information
Selects a Menu
Current selection
is liked
Current selection
is disliked
Increases the
volume level
Decreases the
volume level
Directional Push-buttons; Ê (Up),▬(Down),
9 (Left), : (Right)and►(SELECTS)
Reserved for
future use