EasyManua.ls Logo

McIntosh MX135 - IMPORTANT SAFETY INSTRUCTIONS!; General Safety Guidelines

McIntosh MX135
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERFORMANCE SPECIFICATIONS
Audio
Frequency Response
Stereo:
Left and Right Small speakers: 80Hz-20,000Hz
Subwoofer: 20Hz-80Hz
Left and Right Large speakers: 20Hz-20,000Hz
Subwoofer: OFF
Pro-Logic IIx: (Movie Processing Mode)
Left, Center, Right, Small speakers: 80Hz-20,000Hz
Surround Small speakers: 80Hz-20kHz
Subwoofer: 20Hz-80Hz
(Music Processing Mode)
Left, Center, Right, Large speakers: 20Hz-20,000Hz
Surround Large speakers: 20Hz-20,000Hz
Subwoofer: OFF
Dolby Digital and DTS:
Left, Center, Right, Small speakers: 80Hz-20,000Hz
Surround Small speakers: 80Hz-20,000Hz
Subwoofer: 20Hz-80Hz
Left, Center, Right Large speakers: 20Hz-20,000Hz
Surround Large speakers: 20Hz-20,000Hz
Subwoofer: 20Hz-80Hz
External Input
Left, Center, Right, Left Surround, Right Surround:
20Hz-20,000Hz
Subwoofer: 20Hz-20kHz (no LP filtering)
Rated Output
All Modes: 2.0Vrms for full bit digital input
Input Impedance
22k ohms
Output Impedance
47 ohms at all outputs
Maximum Output Voltage
9.5 Vrms
Total Harmonic Distortion
0.005% at all outputs
Sensitivity
Analog Input: 400mV for 2.0V output
Signal To Noise Ratio – All Outputs
Greater than 90dB un-weighted. Greater than 100dB A
weighted. Greater than 98dB CCIR.
Maximum Input Signal
Analog Input: 6Vrms
Voltage Gain
Analog Input to Output: 14dB
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
Tone Controls
+12dB, -12dB from flat setting
FM Tuner (TM1 option)
Useable Sensitivity
14dBF which is 1.4uV across 75 ohms
50dB Quieting Sensitivity
Mono: 19dBF which is 2.4uV across 75 ohms
Stereo: 35dBF which is 15uV across 75 ohms
Signal To Noise Ratio
Mono: 75dB
Stereo: 70dB
Frequency Response
Mono: +0, -1dB from 20 to 15,000Hz
Stereo: +0, -1dB from 20 to 15,000Hz
Harmonic Distortion
Mono: 0.3% at 100Hz, 0.3% at 1,000Hz, 0.3% at 10,000Hz
Stereo: 0.45% at 100Hz, 0.45% at 1,000Hz, 0.65% at 10,000Hz
Intermodulaton Distortion
Mono: 0.25%
Stereo: 0.45%
Capture Ratio
1.2dB
Alternate Channel Selectivity
75dB
Spurious Response
100dB
Image Response
75dB
RF Intermodulation
65dB
Stereo Separation
45dB at 100Hz, 45dB at 1,000Hz, 35dB at 10,000Hz
SCA Rejection
65dB
2

Other manuals for McIntosh MX135

Related product manuals