Need help?Do you have a question about the McIntosh MX170 and is the answer not in the manual?
General| Type | AV Processor |
|---|---|
| Audio Channels | 15.1 |
| HDMI Inputs | 8 |
| HDMI Outputs | 3 |
| Video Resolution | 4K Ultra HD |
| Audio Formats Supported | Dolby Atmos, DTS:X, Auro-3D |
| Weight | 35 lbs |
| Control System | RS232, IP |
Section for recording serial number and purchase information for future reference.
Lists all components included with the MX170 A/V Processor.
Guidelines for placing the MX170 A/V Processor, including ventilation and custom installation.
Dimensions for cutouts needed for custom installation and ventilation openings.
Instructions for using "L" brackets and screws to secure the unit to a shelf.
Lists and describes the various input connections available on the MX170 rear panel.
Lists and describes the various output connections available on the MX170 rear panel.
Details various input/output connection types including HDMI, USB, LAN, RS232, and IR.
Information on microphone, RS232, and wired IR input connections.
Details on the 8 digital inputs, including optical, coaxial, and balanced XLR.
Connection details for phono input, AC power, and balanced audio outputs.
Using trigger outputs and data ports for component control and integration.
Connecting components to Zone B output and using the Net 2 Out port.
Operation of the standby button, input knob, and volume knob.
Information on the display, trim select knob, and navigation buttons.
Adjusting sound characteristics like equalization, bass, treble, and lip sync.
Selecting surround modes and accessing RoomPerfect trim settings.
Configuring Zone B operations and changing the front panel display mode.
Introduction to the Installer menu and how to navigate setup options.
Configuring speaker types, sizes, and locations for optimal system performance.
Setting bass cutoff frequencies for custom speaker configurations.
Verifying speaker operation and adjusting subwoofer levels.
Performing RoomPerfect calibration and adjusting channel gain settings.
Managing audio processing presets and editing voicing equalization.
Details on voicing, Zone B settings, and managing audio/video sources.
Configuring preferred resolution and default video source for outputs.
Settings for power management, volume limits, and display timeouts.
Configuring triggers, network settings, and managing software updates/backups.
Examples of speaker configurations for Dolby Atmos and Auro-3D systems.
Using Dolby Enabled Speakers as an alternative to ceiling-mounted top speakers.
Examples illustrating how bass is routed in different speaker setups.
Detailed explanation of each button on the HR085 remote control.
Step-by-step guide to performing RoomPerfect room calibration.
Procedures for backing up and restoring MX170 configuration settings.
Steps to update the MX170 firmware via network or USB.
Instructions for restoring the MX170 to its original factory default settings.
Recommendations for packing the unit for shipping to prevent damage.
Detailed technical specifications including frequency response, THD, and dimensions.
Examples of default Voicing equalization curves and their graphical representation.
To Next Page
