Need help?Do you have a question about the McIntosh MX122 and is the answer not in the manual?
General| Type | AV Processor |
|---|---|
| Channels | 11.2 |
| HDMI Inputs | 8 |
| HDMI Outputs | 2 |
| Audio Formats Supported | Dolby Atmos, DTS:X, Auro-3D |
| Network Connectivity | Ethernet, Wi-Fi |
| Control | RS232, IP |
US safety and compliance regulations, including warnings against modifications.
Canadian safety and compliance regulations, including warnings against modifications.
EU directives and safety compliance, including warnings against modifications.
Contact information for obtaining technical help with the product.
Proper positioning, airflow, and clearance requirements for optimal operation.
Cutout dimensions and spacing for integrating the unit into furniture.
Initial steps for accessing and navigating the MX122 setup menus.
Detailed steps for updating the unit's firmware via network.
Fine-tuning settings related to Audyssey room correction.
Initializing Audyssey and assigning speaker configurations.
Fine-tuning speaker distance, levels, and crossover points.
Setting up speaker count and layout before auto-calibration.
Guidelines for achieving optimal acoustic performance with Audyssey.
Starting the automatic room calibration process.
The core measurement phase for detecting and analyzing speakers.
Displays shown during the room data analysis and correction process.
Reviewing the detailed results after the calibration is complete.
Troubleshooting common setup issues and error messages.
Correcting subwoofer level issues encountered during setup.
Prerequisites and setup steps for using AirPlay.
Using AirPlay to stream music from computers and mobile devices.
Connecting and accessing music and image files from a USB drive.
Finding and tuning into local and global internet radio stations.
Streaming music via McIntosh's dedicated vTuner service.
Steps to reset the unit's internal processors for troubleshooting.
Returning the unit to its original factory default configuration.
To Next Page
