McIntosh MX122

23
Setup Mode, con't
NETWORK SETUP MENU Con't
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Connection ●Wired or Wireless
Wired (Ethnernet),
Wireless (Wi-Fi)
If the MX122 is already setup for a Wired ((Ethernet) operation and Wireless (Wi-Fi)
is selected remove the Wired Ethernet Cable from the rear panel of the MX122 before
proceeding. When the MX122 is setup for Wireless operation and it is to be switched
over to Wired ((Ethernet) operation, then connect the Wired Ethernet Cable to the
rear panel of the MX122 before proceeding. Refer to the Video Screen for additional
Information.
Settings
DHCP ●On Off DHCP is an automatic network process making all the necessary network settings
for the MX122. If DHCP Off is selected, the following information will need to be
entered manually: - IP Address, - Subnet Mask, - Default Gateway, - Primary and -
Secondard DNS, Refer to the bottom of Video Screen for Information.
Proxy ●Off On(Address), On(Name) When the MX122 is connected to a Proxy Server, select On and then enter the follow-
ing: - Address and - Port, Refer to the bottom of Video Screen for Information.
IP Control ●Always On Off in Standby Refer to the bottom of Video Screen for Information.
Friendly Name McIntosh:[MX122]
Home Theater, Living Room,
Family Room, Guest Room,
Kitchen, Dining Room, Master
Bedroom, Bedroom, Den, Of-
ce, Other
Refer to the bottom of Video Screen for Information.
Diagnostics Refer to Video Screen for status of the Physical Connection, Router Access and Internet Access
GENERAL SETUP MENU
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Language ●English Francais, Espanol Refer to the bottom of Video Screen for Information.
ZONE2 Setup
Bass ●0dB -10dB to +10dB Refer to the bottom of Video Screen for Information.
Treble ●0dB -10dB to +10dB Refer to the bottom of Video Screen for Information.
High Pass Filter ●Off On Refer to the bottom of Video Screen for Information.
Lch Level ●0dB -12dB to +12dB Refer to the bottom of Video Screen for Information.
Rch level ●0dB -12dB to +12dB Refer to the bottom of Video Screen for Information.
Channel ●Stereo Mono Refer to the bottom of Video Screen for Information.
HDMI Audio ●Th r o ug h PCM Refer to the bottom of Video Screen for Information.
Volume Level ●Va r i a ble 1 to 98 Refer to the bottom of Video Screen for Information.
Volume Limit ●70 80, Off, 60 Refer to the bottom of Video Screen for Information.
Notes: The ● indicates the default setting. When there are grayed out menu items appearing, other Setup Mode Options need to be activated first in order to make changes.