Need help?Do you have a question about the McIntosh MX100 and is the answer not in the manual?
General| Type | AV Processor |
|---|---|
| Network Connectivity | Ethernet, Wi-Fi |
| Video Resolution | 4K |
| Audio Formats Supported | Dolby Atmos, DTS:X |
| Control | RS232, IP Control, IR |
Dimensions for custom installation and ventilation openings.
Instructions for attaching side rack mount brackets.
Controls input selection, Trim, and Setup modes.
Controls volume and Mute/Power On/Off functions.
Details various input/output connections like HDMI, USB, Mic.
Serial and wired IR ports for control and automation.
Details digital audio, power, and XLR audio outputs.
Trigger outputs for component control and data port.
Introduction to setup methods and navigation.
Procedures for accessing and leaving the setup menu.
Using the remote control for menu adjustments.
Accessing settings via a web browser interface.
Configures audio parameters, including Audyssey.
Details MultEQ XT32, Dynamic EQ for room correction.
Manages HDMI features, CEC, ARC, and display settings.
Automatically adjusts volume variations for user preference.
Assigns amplifier channels to speakers and speaker types.
Defines speaker sizes, crossover frequencies, and bass type.
Setting speaker distances and test levels.
Configures network connectivity and naming.
Accesses firmware, save/load, triggers, and lock settings.
Manages configurations, firmware updates, and power control.
Disables or enables the front IR sensor.
Identifies buttons and their functions on the remote.
Notes on external control and battery replacement.
Steps to prepare for and start the room calibration.
Guides microphone placement and room preparation.
Starts the automated room measurement and equalization.
Reviews measurements, saves, aborts, or repeats calibration.
Explains potential errors and how to resolve them.
Lists common Audyssey errors and their corrective measures.
Adjusts settings via remote control or front panel knobs.
Explains individual and global trim setting types.
Assigns surround modes for different input categories.
Lists supported video and audio formats over HDMI.
Technical audio performance metrics of the MX100.
Physical dimensions, weight, and power requirements.
To Next Page
