27
The Trim Menu
The Trim Menu allows you to make and store
adjustments to the to various settings. The following
table lists the Trim option and the range of values that
can be adjusted:
Setting Values
Bass -12dB to +12dB in 1 dB
increments
Treble -12dB to +12dB in 1 dB
increments
Audyssey MEQ On or Off
Audyssey Dyn
EQ
On or Off
Audyssey Dyn
Vol
On or Off
Audio Delay
(Lip Sync)
0 to 500 ms in 25 ms increments
Trim Center -10dB to +10dB in 1 dB
increments
Trim Surrounds -10dB to +10dB in 1 dB
increments
Trim Heights -10dB to +10dB in 1 dB
increments
Trim Subwoofer -10dB to +10dB in 1 dB
increments
Meter Lights On or Off
Display
Brightness
Max, 75%, 50%, 25% or Off
Mode Music
Movie
Games
Auto
Through
The Trim menu can be entered using the Left Knob or
the Remote Control.
Trim Menu Using the Remote
Control
See Figure 29 for Remote Control buttons used for
the Trim menu.
Enter the Trim Menu by pressing the Trim button
(A) located to the left of the silver ring towards the
center of the HR085 remote Control.
You can scroll through the Trim options by pressing
the Trim Button (A) or by pressing the Up Arrow
(B) or Down Arrow (C) on the silver ring.
Use the Left Arrow (D) and Right Arrow (E) on the
silver ring to change values for the selected Trim
option.
Use the Mode/Exit button (F) to exit the Trim
Menu or wait ten seconds for the menu to close
automatically.
Trim Menu Using Knobs
To enter the Trim Menu, press and release the Left
Knob. (Holding the knob for two seconds enters the
Setup Menu instead of the Trim Menu.)
Scroll through the options by turning the Left
knob.
Change the values of the current option by rotating
the Right Knob. Turn the Left Knob to select
another option to edit or press the Left Knob and
release to exit the menu.
Changes will be saved.
More on Trim Sengs
Most Trim settings are saved per Input. For these
settings, changes to one Input will not affect another
Input. The following Trim Inputs are saved by
individual Input:
• Bass
• Treble
• Audio Delay
• Trim Center
• Trim Surrounds
• Trim Subwoofer
• Mode
Some Trim settings are saved Globally. Making a
change to these settings for any Input will make the
same change for ALL Inputs. Global Trim settings
are:
• Audyssey MEQ
• Audyssey Dyn Vol (Dynamic Volume)
• Audyssey Dyn EQ
• Meter Lights
• Display Brightness
AM PRESET
FM
INPUT
VOL
PRESET SEEK PRESET
HRO85
BAND
SELECT
AM
OUTPUT2
OUTPUT 1
LEVEL UP
MENU
INFO
LEVEL DN
TRIM
GUIDE
EXIT
MODE
B
C
E
D
F
A
Figure 29– Remote Control Trim buttons