McIntosh MX100

8
PUSH
TRIM / SETUP
PUSH
POWER / MUTE
M X 10 0 A/V P R O C E S S O R
Movie Dolby Atmos
BLURAY 4K 55%
Figure 05– Front Panel
Left Knob
Right Knob
Infrared (IR) Sensor
Vacuum Flourescent Display (VFD)
The Front Panel
The MX100’s glass and metal Front Panel provides
two control knobs and an informational display.
The Le Knob (INPUT)
The Left Knob, labeled Input, is used to change
inputs, enter Trim setting mode and to enter Setup
mode.
• Turn clockwise or counterclockwise to scroll
through inputs
• Push and release to enter Trim mode
• Push, hold and release after 2 seconds to enter
Setup mode
The Right Knob (VOLUME)
The Right Knob, labeled Volume, is used to change
the volume as well scroll through input values
within Trim Mode. Push and release the knob to
toggle Mute on and off. Push and hold the Knob to
Power Off. Push the Right Knob to Power On when
the MX100 is off,
• Turn clockwise or counterclockwise to scroll
through input values in Setup mode or Trim
mode
• Push and release to Power On when MX100
is Off
• Push and hold for two seconds seconds to
Power Off. POWER OFF will appear on the
display
• Push and release to toggle Mute on/off when
MX100 is On
Audyssey LEDs light
when feature is engaged