22
SPEAKERS SETUP MENU, con't
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Manual Adjustment, con't
Distances ●12ft and 10ft 1ft to 60ft Loudspeaker distances from the Main Listening/Viewing Area, Refer to the bottom of
Video Screen for Information.
Levels ●0dB -12dB to +12dB Select "Test Tone Start" and adjust so each loudspeaker is at the same volume level as
heard in the Main Listening/Viewing Area, Refer to the bottom of Video Screen for
Information.
Crossovers ●All Individual Allows for the crossover point for the Loudspeakers to be set from 40Hz to 250Hz and
they can be set the same or set individualy, Refer to the bottom of Video Screen for
Information.
Bass ●LFE
●LPF (80Hz)
LFE+Main
Low Pass Filter, 80Hz to 250Hz
By default any Speaker Congured as "Small" in Setup, will have any low frequency
signal passed on to the Subwoofer and any Loudspeakers Congured as large. The
LPF (Low Pass Filter) settings determine at what frequency it occurs. Refer to the bot-
tom of Video Screen for Information.
Front Loudspeakers ●A B, A+B Selects whether there is a single pair of Front Loudspeakers or two pairs of Front
Loudspeakers. Refer to the bottom of Video Screen for Information.
2ch Playback ●Auto Manual When the Speaker Adjustments were performed in the Manual Mode, the MX122
allows the "2ch Playback" changes to become active when the audio mode is set to
STEREO during playback. Refer to the bottom of Video Screen for Information.
NETWORK SETUP MENU
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Information
Friendly Name ●McIntosh:[MX122] Refer to other Network Setup
Functions to make changes
Refer to the bottom of Video Screen for Information.
Connection ●Wired or Wireless Refer to other Network Setup
Functions to make changes
Refer to the bottom of Video Screen for Information.
DHCP ●On Refer to other Network Setup
Functions to make changes
Refer to the bottom of Video Screen for Information.
IP Address _ _ _._ _ _._._ _ _ Determined by the Network
Router or manualy set in the
"Network Setting" menu options
Refer to the bottom of Video Screen for Information.
MAC Address _ _ _ _ _ _-_ _ _ _ _ _ Is unique for each MX122 and is
xed by a Universal Standard.
Refer to the bottom of Video Screen for Information.
Notes: The ● indicates the default setting. When there are grayed out menu items appearing, other Setup Mode Options need to be activated first in order to make changes.
To Next Page
Loading...
