Orolia Ltd, Silver Point, Airport Service Rd, Portsmouth, Hants, PO3 5PB, United Kingdom
Tel: +44 (0) 23 9262 3900 Fax: +44 (0) 23 9262 3998 Email: service.uk@mcmurdogroup.com
Page | 5
3.4: Fit battery assembly into casing, care should be taken to ensure foil insert is not
damaged. Position the wires as shown. Connect the battery to the PCB.
3.5: De-press the battery counter reset button, the
LED and buzzer will operate for a duration of 1
second when indicating a successfully reset.
3.6: Fit LED cap – ensuring the wires are not trapped; secure with 2 off Screws. Tighten to
60cNm.
To Next Page
Loading...
