What causes a McQuay ACZ 016A compressor thermal switch to open?
A McQuay Heat Pump compressor thermal switch might open if it is operating beyond design conditions. To resolve this, add facilities so conditions are within allowable limits.
Guidelines for checking units upon arrival for damage and correctness.
Instructions for qualified personnel on unit installation.
Advice on safely moving and lifting the unit.
Ensuring accessibility to unit components for service.
Importance of maintaining unobstructed airflow for efficiency.
Importance of proper piping for system reliability and performance.
Recommendations for sizing and routing suction lines.
Steps to determine appropriate suction line sizes.
Factors influencing liquid line sizing and selection.
Essential checks before initial unit operation.
Step-by-step instructions for starting the unit.
General rules for field wiring connections.
Schematic illustrating electrical connections.
How compressors are staged and protected.
Comprehensive list of configurable setpoints.
Alarms that trigger rapid compressor shutdown.
Conditions causing unit shutdown or limiting operation.
Step-by-step guide to modifying setpoint values.
A practical example of changing a unit setpoint.
Information on current unit alarms.
General steps for modifying setpoints.
Setting thresholds for low evaporator pressure alarms.
Configuring freeze protection and flow interlocks.
Setting thresholds for high condenser pressure alarms.
Role in maintaining superheat for compressor life.
Diagnosing and resolving issues like not running or noise.
Troubleshooting high/low discharge and suction pressures.
Addressing issues with unit loading or unloading intervals.
Diagnosing and fixing compressor oil loss.
Troubleshooting motor overloads, blown fuses, and thermal switches.
To Next Page
General