Need help?Do you have a question about the McQuay Maverick I MPS006AG Series and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Noise Level (Indoor Unit) | 42 dB(A) |
| Noise Level (Outdoor Unit) | 52 dB(A) |
| Weight (Indoor Unit) | 12 kg |
| Model | MPS006AG Series |
| Power Supply | 220-240V, 50Hz |
Inspect unit for damage and verify model number, heating size, and electrical characteristics.
Unit capabilities, design, and key components for performance and operation.
Procedures, codes, standards, and optimal site selection for installation.
Installation of exhaust hood and required clearances for performance and service.
Procedure for converting unit from downflow to horizontal configuration.
Guidelines for installing the unit on a rooftop, considering structural support and access.
Information on fabricating and sizing ductwork according to codes and industry standards.
Instructions for connecting the gas supply to the unit according to codes and standards.
Details on connecting the condensate drain and installing a trap for proper drainage.
Instructions for converting the unit from natural gas to LP gas using a special kit.
Procedures for setting and verifying the furnace gas input based on pressure and altitude.
Requirements for electrical power supply, voltage, and branch circuit connections.
Instructions for gas piping tightness, testing, and valve installation.
Instructions for connecting the unit's wiring, referencing diagrams and entrances.
Details on internal wiring connections, including single-phase contactors and transformer settings.
Information on thermostat compatibility and low voltage wiring.
Step-by-step process of how the furnace ignites and operates when called for heat.
Step-by-step guide for safely starting the furnace unit.
Procedures for safely turning off the furnace unit.
Information on burners, manual reset overtemperature control, and safety precautions.
Procedures for maintaining the furnace section, including cleaning.
Steps to clean the evaporator coil for optimal cooling performance.
Guidelines on lubricating motors and the importance of clean air filters.
Instructions for cleaning external components of the cooling section.
Reference to diagrams for diagnosing and resolving unit problems.
Location of wiring diagrams and charts for proper refrigerant charging information.
To Next Page
