Need help?Do you have a question about the McQuay MDS 180B and is the answer not in the manual?
General| Brand | McQuay |
|---|---|
| Model | MDS 180B |
| Category | Compressor |
| Language | English |
Identifies components and connections on the MDS outdoor unit PCBs (MDOM & MDS-M).
Identifies components and connections on the MDS indoor unit PCBs (MC200-C & MC201-C).
Details wiring connections between outdoor and indoor units, and among outdoor units.
Guides users through setting up the communication port for Smart Commander.
Guidance on adding refrigerant based on system design and calculations.
Verifying the dipswitch settings on indoor units for communication and configuration.
Checking and setting dipswitches on outdoor units for capacity and model.
Monitoring outdoor unit parameters to guide refrigerant charging.
Describes how error codes are displayed on indoor and outdoor units.
Lists and explains error codes for decorative type indoor units.
Details indoor error codes displayed via the MC301 wired controller.
Lists and explains error codes specific to the MDOM PCB.
Lists and explains error codes specific to the MDS-M PCB.
Flow charts to diagnose common system malfunctions like sensor failures.
Details error codes and LED indicators for the phase protector.
To Next Page