5.4 Instruction to Operation
5.4.1 On/Off
Press On/Off button to turn on the unit.
Repress this button to turn off the unit.
Note: The state shown in Fig.5-5
indicates off-state of the unit after energization.
The state shown in Fig.5-6
indicates on-state of the unit after energization.
Fig.5-5 Off state of the unit Fig.5-6 On state of the unit
5.4.2 Mode Setting
Under on-state of the unit, press Mode button to switch the operation modes as the following sequence:
To Next Page
Loading...
