IM 1128-2 39
Type II Dimensions & Weights, Continued
Notes:
1. The overall vessel length can vary depending on the specified tube length and pass arrangement. Consult the McQuay International
certified submittal drawings, or unit dimensions in Catalog WSCWDC-4 for specific vessel lengths.
2. The oil pump width is the dimension from front to back. The height is from the bottom of the sump to the top of the piping
connections. Transporting the oil pump is usually not an issue when compared to the vessels.
3. Allow plus / minus 1 inch (24.5mm) for manufacturing tolerance.
4. All dimensions are shown in inches (mm).
5. All weights are shown in lbs. (kg).
To Next Page
Loading...
Need help?
General
