McQuay WSC 100 User Manual

6 IM 1128-2
4. Install the liquid injection line (see Figure 4). The liquid injection line is attached to the condenser and
has shipping straps securing it to the evaporator and condenser. It, and the compressor, each have a
block-off. Note that any given injection line may be configured somewhat differently than shown on
the drawing.
5. Install the motor cooling line (see Figure 5) using the same procedure as the liquid injection line.
6. Install the motor drain line (see

McQuay WSC 100 Specifications

General

Brand	McQuay
Model	WSC 100
Category	Chiller
Language	English