MCS BOX DRIVE - Rules for Safe Marker Handling; Specifications; Features

1. Rules for Safe Marker Handling
 Treat every marker as if it were loaded.
 Never look down the barrel of a paintball marker.
 Keep your finger off the trigger until ready to shoot.
 Never point the marker at anything you don’t wish to shoot.
 Keep the marker on “SAFE” until ready to shoot.
 Keep the barrel-blocking device in/on the marker’s muzzle when not shooting.
 Always remove paintballs and propellant source before disassembly.
 After removing propellant source, point marker in safe direction and discharge
 until marker is degassed.
 Store the marker unloaded and degassed in a secure place.
 Follow warnings listed on propellant source for handling and storage.
 Do not shoot at fragile objects such as windows.
 Every person within range must wear eye, face, and ear protection designed
 specifically to stop paintballs and meeting ASTM standard F1776.
 Always measure your marker’s velocity before playing paintball and never
 shoot at velocities in excess of 91.44 meters (300 feet-per-second).
NOTE: Eye protective devices designed specifically for paintball use must
be worn by the operator and anyone within range.
2. Specifications
 Power Requirements: 4AA batteries (not
included)
 Capacity: 140+ paintballs
 Feed Rate: 15bps+
 Construction: Composite
3. Features
 Adjustable Speed
 Auto-Off 1 Hour
 Adjustable Sound Sensitivity
 Low Battery Indicator
1