MDB Crib (8501) - Bed Conversions; Toddler Bed Conversion

Move the spring frame to the lowest level.
DO NOT OVERTIGHTEN.
Crib (8501) - Toddler Bed Conversion Assembly Instructions
Q
* All of the parts and hardware you will need are supplied with the crib at the time of purchase.
STEP 1.
STEP 2.
STEP 3.
H4
H4
Q
H4
Q
Unscrew the Allen head bolts and lock washers and remove the front
panel assembly.
The mattress intended for use on the bed shall be a full-size mattress hav-
ing minimum dimensions of 51 5/8” (1310 mm) in length, 27 1/4”(690 mm)
in width and 4” (100 mm) in thickness and not exceeding 6” (152 mm).
The intended user’s minimum age must be at least 15 months old and
maximum weight must not exceed 50 lbs (22.7 kg).
H11
H11
H11
Attach the guard rail (Q) to the side panel posts using four Allen head
bolts (H4) and lock washers (H11). The guard rail can be installed with
the high end facing either to the left or the right. Check to make sure
that all of the bolts are fastened securely.
WARNING :
Failure to follow these warnings and the assembly instructions could result in
serious injury or death from entrapment or strangulation.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place
items with a string, cord, or ribbon, around a child’s neck, such as hood strings or pacifier cords. DO NOT
suspend strings over a toddler bed for any reason. If guard rails are used as the mattress containment
means, guard rails provided must be used to avoid the formation of a gap between the mattress and the bed
that could cause an entrapment.