KEEP THIS MANUAL IN A
SAFE PLACE FOR FUTURE
REFERENCE.
Be sure to tighten the cross bar screws now that you have installed to the stationary side. Recheck all screws
and bolts to be sure they are fastened securely.
Before placing your mattress in the crib, you can make your own mattress protector by cutting the
cardboard packing insert to 27” x 51”. Place it on the spring frame under the mattress to extend the
life of the mattress.
page 6
Ready to use.
STEP 6.
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and serial
number of your crib, the name of the store where you made
the purchase, the date of purchase and the wood finish in
.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL
WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE
REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR
WARRANTY INFORMATION. KEEP THIS MANUAL FOR FUTURE
REFERENCE.
Please read the Caution and Warning
Statements insert before using your crib.
SAMPLE LABEL
.
www.themdbfamily.com
CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 INCHES BY
51 5/8 INCHES (69 CM BY 131 CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES(15 CM).
the box to the lower right
To Next Page
Loading...
