Need help?Do you have a question about the MDS 28 FS Pro and is the answer not in the manual?
Detailed steps for assembling the engine components after unboxing.
Correctly positioning the carburetor and ensuring an airtight seal with the O-ring.
Guidelines for breaking in ringed engines, focusing on rich mixture and cooling.
Procedure for breaking in ABC engines, highlighting key differences.
Instructions for securely attaching the muffler to the engine.
Recommendations for optimal fuel tank positioning for performance.
Guidance on selecting the proper propeller size and installation.
Essential steps and equipment needed to start the engine.
Setting the high-speed needle valve for initial engine operation.
Setting the low-speed needle valve for proper idle.
Method for tuning the low-speed needle using the pinch test.
Diagnosing and resolving lean running issues, often related to O-ring seal.
Guidance on fuel quality and the use of inline fuel filters.
Proper use of after-run oil to prevent engine corrosion.
Additional advice on choosing the correct propeller for the engine.
Information on the included glow plug and potential replacements.
Detailed steps for assembling the engine components after unboxing.
Correctly positioning the carburetor and ensuring an airtight seal with the O-ring.
Guidelines for breaking in ringed engines, focusing on rich mixture and cooling.
Procedure for breaking in ABC engines, highlighting key differences.
Instructions for securely attaching the muffler to the engine.
Recommendations for optimal fuel tank positioning for performance.
Guidance on selecting the proper propeller size and installation.
Essential steps and equipment needed to start the engine.
Setting the high-speed needle valve for initial engine operation.
Setting the low-speed needle valve for proper idle.
Method for tuning the low-speed needle using the pinch test.
Diagnosing and resolving lean running issues, often related to O-ring seal.
Guidance on fuel quality and the use of inline fuel filters.
Proper use of after-run oil to prevent engine corrosion.
Additional advice on choosing the correct propeller for the engine.
Information on the included glow plug and potential replacements.
To Next Page
General